Category  
injection mold  (7)
Plastic mold  (3)
Mold china  (7)
injection mold china  (14)
Mold design  (7)
Mold manufacturers  (7)
Molding building  (4)
Prototype Part  (1)
mouldchina  (0)
moldchina supplier  (2)
toolmaker  (4)
Prototype mold  (1)
tooling china  (2)
Mold supplier  (2)
injection mold factory  (2)
injection mold making  (2)
mold making  (1)
china mould factory  (1)
china mould maker  (2)
China toolmaker  (1)
  Latest article  

Contact us:

    Tel: +86-(0)755-36841556

    Fax: +86-(0)755-89698547

   E mail: Sales@mold-supplier.net 

               Hcabin@163.com

  Skype: wayle123.ning

Tooling shop

CCN shop

Wire Cut Machining

Flat grinding Machining

Mold china manufacture
Cabin Molds & Plastic Co., Ltd   2013-03-16 21:32:24 Author:SystemMaster Source: Font size:[Large][Middle][Small]

            Mold china manufacture:

            We are manufacture injection mold have below check:

            1.meeting check the manufacture possible or not

            2. find solution..how to injection mold manufacture

            3.making the inejction mold manufacture check list

            4.doing the mold timetable to customer.

            5.sent out every weeks timetable and injection mold process picture to customer

we are try much better to customer on injection mold ,samples

Inspection figure is mainly as follows:
1 The important principle of project
based core, cavity schedule, whether the omission of the design part.
take several gold type is appropriate.
parting of the settings are correct? Shi Jin-type meets the requirements of the book like?
can completely fill the cavity?
production costs are within budget?
molded production costs are within budget?
gold-based delivery time can be completed?
to ensure the delivery time, whether to take reasonable measures?
molded cavity can successfully emerge?
molded core could well emerge?
gate, whether the improper flow channel configuration?
whether the interference at the cooling water?
support columns, mandrel, set-oriented column without interference?
Mold Shrinkage calculations are correct?
split inserts the correct way?
with each other on both sides of the part design is correct?
molding machine to pay official sample is taken to meet the requirements?
other special requirements are met?

2 King-type structure in review
the current design is correct or not, whether changes can be improvements?
resin flows expected correct?
core, cavity-off response is correct or not?
slider and sliding core design is correct?
with correct at the tolerance?
exhaust is appropriate?
with the gap is appropriate?
assembly is difficult?
demolition convenience?
Whether the phenomenon of dialogue
prevention?
whether the interference between the components on both sides?

3. Conduct a detailed review of the parts:
whether the size of mutual inconsistency?
cross-section shape is correct or not?
parts number correct?
parts material correct?
plate meets the rigid requirements?
cavity stiffness, strength meets the requirements?
gate shape is appropriate?
processing method is a proper consideration?
electrode design is correct?

Latest comments
Release comments

   42# wanfu Road   Pinghu Town, Shenzhen City, Guangdong Province, PR.China Postal code :518111 
  Tel:+86-(0)755-89698547     Fax:+86-(0)755-89385672  E_mail: Sales@mold-supplier.net   SKYPE: wayle123.ning
mold | mould | plastic | Mold china | tooling | making china injection mould | Plastic mould | Plastic mold stamping china | Tool making china | Mold flow | Mold supplier | Mold factory | Mold design | injection mold | injection mould china | mold design china
Cabin  Molds & Plastic Co., Ltd  Copyright @ 2008-2012